Install the app, allow packet capture and start the tracker before entering the game. The damage meter requires Npcap.
⌁
How to open itWindows installer → TeamMate → Settings → System
What to do
Download and run the installer from the site. If Windows warns about the unsigned installer, choose “More info” → “Run anyway”.
Install Npcap on first launch if the setup prompts you. Keep the default installation options.
Start Tracker, check its tray icon, then open AION 2.
✓ Check the result
The main window shows a session, and your character appears after you enter the game.
TeamMate screen · sample data
First steps
Character not detected
FREE
Character and server detection can take a few seconds after the character loads.
⌁
How to open itHome → Session
What to do
Make sure you are in the game world, not on the character selection screen.
Wait a few seconds. If the name is still missing, change location or teleport.
If that does not help, relog the character and confirm Tracker is running.
✓ Check the result
The session shows your character name and server.
TeamMate screen · sample data
First steps
Read your first fight
FREE
The meter builds a fight from damage events. Your first result appears after a few attacks.
⌁
How to open itHome → “DPS meter” tab
What to do
Engage a monster or boss.
Deal a few hits and open the DPS meter tab.
Use “Me & group” to limit the list to your party.
✓ Check the result
A fight card appears with a target, duration, total damage and player rows.
TeamMate screen · sample data
Overlay & DPS
Overlay & DPS
Monsters and combat targets
FREE
Target name, fight time, HP and participants belong to combat statistics. Pets are a separate feature.
⌁
How to open itDPS → data settings; overlay during combat
What to do
Choose fight capture mode in DPS settings. Boss-only mode excludes ordinary monsters from DPS fights.
Start a fight: the card shows the known target name, time and current / maximum HP. Maximum requires a supported NPC packet; otherwise a dash appears.
Use Solo / Group for your damage or available fight participants. The fight list is not guaranteed to match the game party roster.
After combat, open the result notification or a saved fight for damage, contributions, skills and effects. Farm kill counters and pet tracking are separate PRO tools.
On world bosses the overlay shows only your own damage — so the numbers stay accurate even in a big crowd.
✓ Check the result
Combat and pet cards keep their respective metrics separate.
Combat: target and damage rows; aether is separate from idle event chips.TeamMate screen · sample data
Overlay & DPS
In-game overlay
FREE
Idle shows your character and enabled game blocks. Combat shows the target, received HP data and player DPS.
⌁
How to open itHome → Overlay; overlay gear → Settings
What to do
Open the overlay. Unlock it to drag or resize from its edges; lock it again when ready.
Use Layout settings for width and row height. Default width is 390 px; manual size is saved.
Set panel opacity and opacity outside hover. When the pointer leaves, the whole window dims, including text and icons.
One Solo / Group button switches between your character and available fight participants. Hover opens a player card; double-click opens details.
Choose the elements you need in Blocks. Pets and farming require PRO; notifications have separate event settings.
✓ Check the result
Boss name, time, HP and aether do not overlap. Unknown maximum HP is shown as a dash.
Idle: the panel is dimmed while character status and enabled blocks remain visible.Idle with pointer hover: mode, menu, Settings, Lock and Close controls are visible.Combat: target and damage rows; aether is separate from idle event chips.Overlay and DPS meter settings → Layout.
Overlay & DPS
Fight details: skills and timeline
PRO
Open a saved fight to inspect skills, the event timeline and performance tips.
⌁
How to open itDPS meter → History → select a fight → Details
What to do
Open a fight from history or the latest-fight card.
Switch between damage, timeline, deaths and group-buff views.
Compare damage spikes and idle gaps with the timeline.
✓ Check the result
The details show which skills dealt damage and when.
TeamMate screen · sample data
Overlay & DPS
Saved fights, history and comparison
PRO
History keeps previous fight results and lets you inspect or compare them.
⌁
How to open itDPS meter → Fight history
What to do
Open the fight history list.
Select a row to view skills and the summary.
Select two comparable fights and open the comparison.
✓ Check the result
Compare the same target under similar conditions for a useful comparison.
TeamMate screen · sample data
Overlay & DPS
Boss timeline and voice prompts
FREE
The timeline shows expected boss mechanics and can speak upcoming prompts.
⌁
How to open itSettings → Overlay → Displayed data
What to do
Enable the boss timeline in the overlay.
Choose the voice and prompt volume in voice settings.
Start a supported boss fight and keep the overlay open.
✓ Check the result
Upcoming events appear on the timeline and are spoken before the mechanic.
TeamMate screen · sample data
Overlay & DPS
Run summary
PRO
The summary brings bosses, DPS and party deaths together for a run.
⌁
How to open itDPS meter → Run summary
What to do
Start or open a supported run.
After encounters, open “Run summary”.
Review boss count, best DPS, rank and party deaths.
✓ Check the result
The summary includes encounters recognized in the current run.
TeamMate screen · sample data
Farm & goals
Farm & goals
Farm session
PRO
A session tracks time, kills, kinah, experience and loot as you play.
⌁
How to open itHome → Session
What to do
Rename the session to distinguish routes or play sessions.
Leave Tracker running while you farm.
Review time, kills and the loot log in the main window.
✓ Check the result
Stats update during play and belong to the current session.
TeamMate screen · sample data
Farm & goals
Farm report: save and share
FREE
Create a session summary image to share with friends or keep for yourself.
⌁
How to open itHome → Session → “Report as image”
What to do
Choose “Report as image” on the session page.
Tracker creates a card with your character, time, kills, rates and loot.
Copy the image or open the folder where it was saved.
✓ Check the result
The card shows key stats and top loot, ready to share.
TeamMate screen · sample data
Farm & goals
Goals and challenges
PRO
Set a measurable farming goal or start a timed challenge.
⌁
How to open itHome → Goals
What to do
Choose “Set goal” and enter an item or metric with a target amount.
For a timed run, choose a challenge duration.
Track progress on the home screen and in the overlay.
✓ Check the result
Current progress and the remaining amount update during the session.
TeamMate screen · sample data
Farm & goals
Aether and resources
FREE
Resources update from game packets; saved values reflect the latest observation.
⌁
How to open itOverlay → Aether; Home → Resources
What to do
Open Resources, choose the character and check the last observation time.
Aether uses base(+bonus)/maximum when all parts are known. Shugo keys, entries and scrolls are separate values.
Missing data is shown as a dash. Start Tracker before login; safely relog if the initial packet was missed.
✓ Check the result
Unknown limits are not guessed. Use the separate Pets guide topic.
Character resources. Values in this screenshot are examples.
Farm & goals
Progress window
PRO
Charts show how combat power, currencies and pets changed over time.
⌁
How to open itHome → Progress
What to do
Open Progress after a few play sessions.
Choose a character and a 7 or 30 day range.
Compare today’s change with the longer trend.
✓ Check the result
Charts fill as history accumulates and show the periods with available data.
TeamMate screen · sample data
Game tools
Game tools
Pets
PRO
TeamMate takes the progress of all 200 pets straight from the game: levels, souls and even the pets you have not obtained yet. Your picked pets are shown in the overlay.
⌁
How to open itHome → Pets; Overlay gear → Tracker PRO → Pets
What to do
Start TeamMate before your character logs in. On login the app picks up the progress of every pet by itself — nothing to enter by hand.
Open Pets with active PRO. Each pet shows its level, souls and how many are left to the next level, plus where to get souls with an On map button.
Filters and search help you find a pet fast: by type and by the ones you can farm today.
Turn on Pin for the pets you want — their progress appears in the overlay below the main blocks and updates with every new soul.
Obtaining a pet takes 5 souls, then levels 1→2 and 2→3 take 25 and 75. Maximum level shows Max. New pets from game updates arrive with TeamMate updates.
If the progress does not match the game, check PRO and relog your character with TeamMate already running — the data refreshes on login.
✓ Check the result
Levels and souls in TeamMate match the game, and pinned pets appear in the overlay without covering DPS rows.
Pinned pets in the overlay: level, souls and what is left to the next level.Pets page: progress from the game, soul sources and pinning to the overlay.
Game tools
PvP statistics
PRO
Review recorded PvP stats and compare character results.
⌁
How to open itHome → PvP
What to do
Open the PvP tab.
Choose an available mode or character.
Use the columns and sorting to find the results you need.
✓ Check the result
Data appears after Tracker records relevant game events.
TeamMate screen · sample data
Game tools
Farm duels
PRO
Compare two characters’ farming pace and loot in a dedicated duel result.
⌁
How to open itHome → Duels
What to do
Open Duels and choose the participants.
Match the session duration and conditions.
Open the result to see the differences between participants.
✓ Check the result
The comparison is most useful when both sessions used similar conditions.
TeamMate screen · sample data
Game tools
Hidden Cube
PRO
The overlay arrow leads straight to a hidden cube: it shows the direction, the distance and the height — whether the cube is above or below you.
⌁
How to open itHome → Hidden Cube; Overlay gear → Tracker PRO → Hidden Cube
What to do
With active PRO, open Hidden Cube and enable consent for the feature. The search stays off without consent.
Turn on Arrow to cube and open the overlay. When a cube appears nearby, a bar slides out above the overlay — both outside and during combat.
Turn your character towards the arrow. Next to it is the distance in metres, below it the height: an up arrow means the cube is above you, a down arrow means below.
Walk to the cube and watch the distance. Under 5 m the metres change to “nearby”.
The map icon on the bar opens the cube spot on the DBAion2 map. In settings, enable the sound for a new cube and set the volume.
The Hidden Cube page shows the same cube with the arrow and the history of cubes found this session. Clear it with one button.
After a game update the arrow may be unavailable until a new TeamMate version is out — update the app when it is released. To turn the feature off, disable consent.
✓ Check the result
The arrow points at the cube, the distance drops as you move, and the height tells you whether to climb or go down. Illustrations show the current UI with sample data.
Experimental feature. It shows what the game hides, so it may breach the game rules and lead to account restrictions. You use it at your own risk.
The cube arrow above the overlay: direction, distance and height (the cube is 6 m above).Hidden Cube page: consent, sound, the arrow and the history of found cubes.Combat with a cube: the arrow stays above the combat overlay.
Game tools
Quests
FREE
The quest window helps you check active objectives while staying in the game.
⌁
How to open itHome → Quests
What to do
Open Quests.
Find a quest and check its objective or next step.
If needed, open the DBAion2 map from the card link.
✓ Check the result
The selected quest and its current step appear in the window.
TeamMate screen · sample data
Game tools
Field bosses, events and alerts
FREE
Check upcoming events and field bosses, then tune reminders to your play schedule.
⌁
How to open itHome → Recent events; Settings → Alerts
What to do
Open Events or Field bosses and choose a map.
Configure reminders in Alerts.
Keep Tracker running to see updated times and reminders.
✓ Check the result
The schedule shows the next available times. Sharing boss timers with the website is an optional PRO setting.
TeamMate screen · sample data
Game tools
Combat assistant
PRO
The assistant shows selected buffs and cooldowns over the game, with optional voice prompts.
⌁
How to open itSettings → Overlay → Combat assistant (Ctrl+Alt+A)
What to do
Choose your class and configure the reminders you need.
Add the skills and buffs to track.
Toggle the assistant with Ctrl+Alt+A.
✓ Check the result
The selected reminders appear over the game and update with combat events.
TeamMate screen · sample data
System
System
Overlay layout
FREE
Tune the DPS panel size, row height and player list for your screen.
⌁
How to open itSettings → Overlay → Layout
What to do
Open overlay settings and choose Layout.
Adjust width, row height and the number of visible players.
Choose whether to show only your character.
✓ Check the result
The preview reflects the selected size and row layout.
Overlay and DPS meter settings → Layout.
System
Displayed data
FREE
Choose which stats appear in each player row and above the list.
⌁
How to open itSettings → Overlay → Displayed data
What to do
Enable the stats you need: DPS, total damage, share, target or boss health.
Hide unnecessary rows to leave more room for the game.
Check the result in the preview.
✓ Check the result
The overlay now shows only the selected stats.
TeamMate screen · sample data
System
Name effects
FREE
Choose how your character name is highlighted in the meter.
⌁
How to open itSettings → Overlay → Name effects
What to do
Open Name effects.
Choose an available name effect.
Check that the name remains readable against the overlay.
✓ Check the result
The effect is visible on your name in the preview.
TeamMate screen · sample data
System
Colour palette, colours and fonts
FREE
Tune the theme, palette, class colours and font for a readable overlay.
⌁
How to open itSettings → Overlay → Colours and fonts
What to do
Choose a palette for the overlay element you want to change.
Adjust class colours, your name and text.
Choose a font and check contrast in the preview.
✓ Check the result
Numbers and names remain clear against the chosen background.
TeamMate screen · sample data
System
Overlay farm panel
FREE
The farm panel shows session progress and loot cards alongside the game overlay.
⌁
How to open itSettings → Overlay → Farm panel
What to do
Set the panel scale and opacity.
Choose which cards and stats to display.
Check its position in a quiet game scene.
✓ Check the result
The panel is readable and does not cover important game content.
TeamMate screen · sample data
System
Overlay blocks
FREE
Control individual overlay blocks so only the useful parts remain on screen.
⌁
How to open itSettings → Overlay → Blocks
What to do
Open Blocks.
Enable the blocks you need and turn off the rest.
Position the panels so they do not cover the game.
✓ Check the result
Only the selected blocks remain on screen.
TeamMate screen · sample data
System
Settings profiles
FREE
Save different layouts and assign a profile to a character.
⌁
How to open itSettings → Overlay → Profiles
What to do
Configure the overlay for a mode or character.
Create a profile and give it a clear name.
Assign it to a character if needed, then save.
✓ Check the result
Selecting a profile loads its saved settings.
TeamMate screen · sample data
System
Settings backup
FREE
Export settings as a code and restore them on another computer.
⌁
How to open itSettings → Overlay → Backup
What to do
Create a backup code and store it somewhere safe.
To transfer settings, open this section on the other device.
Paste the code and review the imported settings.
✓ Check the result
The overlay settings are restored; you can also share its appearance alone.
TeamMate screen · sample data
System
Overlay optimisation
FREE
Reduce overlay work when every bit of performance matters during combat.
⌁
How to open itSettings → Overlay → Optimisation
What to do
Open Optimisation.
Reduce update work or disable effects one at a time.
Check responsiveness and readability after each change.
✓ Check the result
The overlay remains useful while its workload suits your PC.
TeamMate screen · sample data
System
Run counter
FREE
The counter helps track repeated boss runs on your chosen route.
⌁
How to open itSettings → Overlay → Runs
What to do
Add the bosses you want to track.
Reset the counter before a new run series.
Compare encounter counts with the run summary.
✓ Check the result
The counter updates after recognized encounters.
TeamMate screen · sample data
System
Hotkeys and overlay capture
FREE
Choose convenient shortcuts to control the tracker. To record gameplay, use the overlay window as a source in your capture software.
⌁
How to open itSettings → Hotkeys
What to do
Open Settings → Hotkeys. Select Change next to the action you want to configure.
Assign an unused shortcut and test it in the game. Use the reset button to restore the default shortcuts.
For recording, select the overlay window in your capture software and check that unwanted windows are not included.
✓ Check the result
The shortcut performs the selected action, and the recording shows the intended overlay.
Settings → Hotkeys: actions and assigned shortcuts.
System
OBS overlay
FREE
Send Tracker cards to OBS through a local web page and a Browser Source.
⌁
How to open itSettings → Overlay → OBS overlay
What to do
Start the OBS overlay in Settings.
Copy the address and add it in OBS as a Browser Source.
Set the source to 420 × 720 with a transparent background, then check the scene.
✓ Check the result
OBS shows the same cards as the in-game overlay; the page is available only on this PC.
TeamMate screen · sample data
System
Discord webhook
PRO
Send selected Tracker alerts to a Discord channel using a webhook.
⌁
How to open itSettings → Discord
What to do
Create a webhook in the Discord channel settings.
Paste the HTTPS address into Tracker and send a test message.
Enable only the events you want to receive.
✓ Check the result
The test arrives in the right channel; if it fails, check the URL and connection.
TeamMate screen · sample data
System
Interface language: Russian and English
FREE
Switch the application interface between Russian and English.
⌁
How to open itSettings → Appearance → Language
What to do
Choose Russian or English.
Restart the app if already-open windows did not change language.
Check labels in the main window and overlay.
✓ Check the result
The main window uses the selected language.
TeamMate screen · sample data
System
PRO and licence key
PRO
Activate PRO with a licence key to unlock the app’s additional tools.
⌁
How to open itSettings → PRO and key
What to do
Open the PRO section.
Enter your key and choose Activate.
Check your access status in the same section.
✓ Check the result
The app shows active access and PRO tools are available.
TeamMate screen · sample data
System
Tracker updates
FREE
Check release notes and install updates from the app.
⌁
How to open itHome → What’s new / Update
What to do
Open “What’s new” or choose “Update”.
Review the version number and change list.
If an update is available, install it and restart the app.
✓ Check the result
The home screen shows the installed version.
TeamMate screen · sample data
System
Troubleshooting
FREE
Check capture and settings in order. A restart or installing Npcap often resolves the issue.
⌁
How to open itHome → Capture status; Tracker icon in the Windows notification area
What to do
No character: enter the world, wait, teleport or relog.
No damage: confirm Npcap is installed, then restart Tracker and the game.
With a VPN or tunnel, check that game traffic uses a supported network interface.
Overlay not clickable: hide it with its hotkey and check its display mode. If security software interferes, review its block history.
✓ Check the result
After changing the network adapter, permissions or Npcap, restart the app and check a new fight.